Wire | Tinius Olsen

Model 25kL

Prashant Srivastava — Fri, 08 Mar 2024 08:52:53 +0000

The model 25kL is an Electromechanical Materials Testing Machine. It is a robust design for use in a range of materials testing.

The model 25kL is designed for tension, compression, flexure and shear strength testing on materials and assemblies. The robust design that incorporates quality materials and components ensures that our reputation for superior system performance, ease of use, and longevity is maintained. A variety of loadcells are available at differing capacities that give precise applied load measurements from the smallest test specimen to ones that go to full machine capacity. Test machines become complete, powerful test systems with the addition of grips to hold the specimen, strain measurement instrumentation and Tinius Olsen’s Horizon Data Analysis software.

Compact Split Furnace

towa_admin — Thu, 25 May 2023 09:01:32 +0000

The Tinius Olsen Compact Split furnace provides a means of performing tensile tests within a temperature range of up to 1200°C/2200°F or 1400°C/2500°F

The furnace is supported on a sliding rail located behind the columns of the testing machine. When the furnace is not in use, it can be pushed aside and clear of the operating area.

The furnace has a high quality rigid stainless steel outer case with a polished finish. Rigidity is important to prevent the insulation cracking in service and to allow high temperature extensometers to be mounted directly on the furnace case.

Additionally, the unit features high efficiency ceramic fiber insulation in support of accurate temperature management and safe working.

Chamber – (Ambient to 600°C)

towa_admin — Wed, 24 May 2023 11:08:37 +0000

Suitable for most twin screw materials testing machines, the Tinius Olsen Environmental Chamber provides a means for performing physical tests within a temperature range of Ambient-600°C (Ambient-1112°F).
Air is forced over the heating elements located in an insulated enclosure protecting the user and forced into the working chamber area top and bottom. It is then drawn back through the centre of the chamber, through a baffler to the heating elements and recirculated.

Controller type Eurotherm model 3016 for single thermocouple temperature control configuration. Optional sub-zero temperature testing is available via a self-pressurising liquid nitrogen Dewar.

Door is left hinged. Safety interlock operated by door hinge cut heating process when door is opened. Viewing window is central to door 350mm high by 170mm wide. supports use of non contacting extensometer and deflectometers.

The chamber is supported on a frame located between the columns of the testing machine. When the chamber is not in use, the chamber can be rolled back and parked clear of the operating area.

Chamber – (Ambient to 350°C)

towa_admin — Wed, 24 May 2023 11:07:47 +0000

Air is forced over the heating elements located in an insulated enclosure protecting the user and forced into the working chamber area top and bottom. It is then drawn back through the centre of the chamber, through a baffler to the heating elements and recirculated.

Controller type Eurotherm model 3016 for single thermocouple temperature control configuration. Optional sub-zero temperature testing is available via a self-pressurising liquid nitrogen Dewar.

The chamber is supported on a frame located between the columns of the testing machine. When the chamber is not in use, the chamber can be rolled back and parked clear of the operating area.

Chamber – (-100 to 350°C)

towa_admin — Wed, 24 May 2023 11:05:51 +0000

Suitable for most twin screw materials testing machines, the Tinius Olsen Environmental Chamber provides a means for performing physical tests within a temperature range of -100-350°C (-148-662°F).

Controller type Eurotherm model 3016 for single thermocouple temperature control configuration. Optional sub-zero temperature testing is available via a self-pressurising liquid nitrogen Dewar.

The chamber is supported on a frame located between the columns of the testing machine. When the chamber is not in use, the chamber can be rolled back and parked clear of the operating area.

Chamber – (-150 to 600°C)

towa_admin — Wed, 24 May 2023 10:46:49 +0000

Suitable for most twin screw materials testing machines, the Tinius Olsen Environmental Chamber provides a means for performing physical tests within a temperature range of -150-600°C (-238-1112°F).

Controller type Eurotherm model 3016 for single thermocouple temperature control configuration. Optional sub-zero temperature testing is available via a self-pressurising liquid nitrogen Dewar.

The chamber is supported on a frame located between the columns of the testing machine. When the chamber is not in use, the chamber can be rolled back and parked clear of the operating area.

Wire Twister

towa_admin — Thu, 12 Aug 2021 05:04:13 +0000

The Tinius Olsen wire twisting machine is a benchtop system that provide the simplicity, performance and affordability needed for quality control and product testing.

The twister is designed to check the number of twists required to fracture a wire. Normally furnished as a bench unit, these machines are also available as floor models, and as multiple twisting units for simultaneously testing two, three or more samples.

The standard, variable speed, motor drive makes up to 62 twists per minute (rpm) with a maximum torsion rating of 1,500in.lbs. A counter indicates the total number of twists, and automatically stops the machine when the specimen fails.

Wire samples up to 18in long can be accomodated. An initial tensile load of up to 150lb can be applied to prevent kinking. Load is read in 2lb, increment on a scale.

Model MHT 1000

towa_admin — Tue, 10 Aug 2021 08:56:23 +0000

For maximum tensile testing throughput and capability, Tinius Olsen offers horizontal tensile testing machines with capacities of 5kN (1000lbf).

Model MHT-1,000 horizontal testing machine offer unique benefits over vertically oriented testers by allowing a range of accessories to be mounted next to the machine to turn it into a fully automatic testing station.

They are designed primarily for production departments and are typically in constant use; however, the grips can be modified to accommodate different shaped samples and alternate grips can be provided for customers when test requirements change.

The horizontal extensometer that is typically used with the machine has a unique design that incorporates pneumatic controls to automatically lower the arms prior to the test and raise the arms at the end of the test. Air bearings on the extensometer provide accurate strain measurement through fracture.

Model 3000SL

towa_admin — Tue, 10 Aug 2021 07:05:26 +0000

The Model 3000SL is designed for tension, compression, flexure and shear strength testing on materials, assemblies and components. The robust design, quality materials and precision engineering ensure testing capability even at full load, day after day.

Tinius Olsen’s hydraulic testers have long been recognized as the standard for accuracy, dependability and versatility in universal testing machines. The many thousands of testers currently in use throughout the world attest to this fact. Now more than ever, the SL series represents the highest standard in hydraulically powered universal testing machines.

Model 2000SL

towa_admin — Tue, 10 Aug 2021 07:03:58 +0000

The model 2000SL is designed for tension, compression, flexure and shear strength testing on materials and assemblies. The robust design that incorporates quality materials and components ensures that our reputation for superior system performance, ease of use, and longevity is maintained.

Tinius Olsen’s hydraulic testers have long been recognized as the standard for accuracy, dependability, and versatility in universal testing machines. The many thousands of testers currently in use throughout the world attest to this fact. Now more than ever, the SL series represents the highest standard in hydraulically powered universal testing machines.