Tensile Test | Tinius Olsen

Model 50kL

Prashant Srivastava — Fri, 08 Mar 2024 09:55:44 +0000

The model 50kL is an Electromechanical Materials Testing Machine. It is a robust design for use in a range of materials testing.

The model 50kL is designed for tension, compression, flexure and shear strength testing on materials and assemblies. The robust design that incorporates quality materials and components ensures that our reputation for superior system performance, ease of use, and longevity is maintained. A variety of loadcells are available at differing capacities that give precise applied load measurements from the smallest test specimen to ones that go to full machine capacity. Test machines become complete, powerful test systems with the addition of grips to hold the specimen, strain measurement instrumentation and Tinius Olsen’s Horizon Data Analysis software.

Model 25kL

Prashant Srivastava — Fri, 08 Mar 2024 08:52:53 +0000

The model 25kL is an Electromechanical Materials Testing Machine. It is a robust design for use in a range of materials testing.

The model 25kL is designed for tension, compression, flexure and shear strength testing on materials and assemblies. The robust design that incorporates quality materials and components ensures that our reputation for superior system performance, ease of use, and longevity is maintained. A variety of loadcells are available at differing capacities that give precise applied load measurements from the smallest test specimen to ones that go to full machine capacity. Test machines become complete, powerful test systems with the addition of grips to hold the specimen, strain measurement instrumentation and Tinius Olsen’s Horizon Data Analysis software.

Model 10kL

Prashant Srivastava — Fri, 08 Mar 2024 08:36:33 +0000

The model 10kL is an Electromechanical Materials Testing Machine. It is a robust design for use in a range of materials testing.

The model 10kL is designed for tension, compression, flexure and shear strength testing on materials and assemblies. The robust design that incorporates quality materials and components ensures that our reputation for superior system performance, ease of use, and longevity is maintained. A variety of loadcells are available at differing capacities that give precise applied load measurements from the smallest test specimen to ones that go to full machine capacity. Test machines become complete, powerful test systems with the addition of grips to hold the specimen, strain measurement instrumentation and Tinius Olsen’s Horizon Data Analysis software.

Model 5KL

Prashant Srivastava — Fri, 08 Mar 2024 06:35:10 +0000

The model 5kL is designed for tension, compression, flexure and shear strength testing on materials and assemblies. The robust design that incorporates quality materials and components ensures that our reputation for superior system performance, ease of use, and longevity is maintained. A variety of loadcells are available at differing capacities that give precise applied load measurements from the smallest test specimen to ones that go to full machine capacity. Test machines become complete, powerful test systems with the addition of grips to hold the specimen, strain measurement instrumentation and Tinius Olsen’s Horizon Data Analysis software.

Compact Split Furnace

towa_admin — Thu, 25 May 2023 09:01:32 +0000

The Tinius Olsen Compact Split furnace provides a means of performing tensile tests within a temperature range of up to 1200°C/2200°F or 1400°C/2500°F

The furnace is supported on a sliding rail located behind the columns of the testing machine. When the furnace is not in use, it can be pushed aside and clear of the operating area.

The furnace has a high quality rigid stainless steel outer case with a polished finish. Rigidity is important to prevent the insulation cracking in service and to allow high temperature extensometers to be mounted directly on the furnace case.

Additionally, the unit features high efficiency ceramic fiber insulation in support of accurate temperature management and safe working.

Chamber – (Ambient to 600°C)

towa_admin — Wed, 24 May 2023 11:08:37 +0000

Suitable for most twin screw materials testing machines, the Tinius Olsen Environmental Chamber provides a means for performing physical tests within a temperature range of Ambient-600°C (Ambient-1112°F).
Air is forced over the heating elements located in an insulated enclosure protecting the user and forced into the working chamber area top and bottom. It is then drawn back through the centre of the chamber, through a baffler to the heating elements and recirculated.

Controller type Eurotherm model 3016 for single thermocouple temperature control configuration. Optional sub-zero temperature testing is available via a self-pressurising liquid nitrogen Dewar.

Door is left hinged. Safety interlock operated by door hinge cut heating process when door is opened. Viewing window is central to door 350mm high by 170mm wide. supports use of non contacting extensometer and deflectometers.

The chamber is supported on a frame located between the columns of the testing machine. When the chamber is not in use, the chamber can be rolled back and parked clear of the operating area.

Chamber – (Ambient to 350°C)

towa_admin — Wed, 24 May 2023 11:07:47 +0000

Air is forced over the heating elements located in an insulated enclosure protecting the user and forced into the working chamber area top and bottom. It is then drawn back through the centre of the chamber, through a baffler to the heating elements and recirculated.

Controller type Eurotherm model 3016 for single thermocouple temperature control configuration. Optional sub-zero temperature testing is available via a self-pressurising liquid nitrogen Dewar.

The chamber is supported on a frame located between the columns of the testing machine. When the chamber is not in use, the chamber can be rolled back and parked clear of the operating area.

Chamber – (-100 to 350°C)

towa_admin — Wed, 24 May 2023 11:05:51 +0000

Suitable for most twin screw materials testing machines, the Tinius Olsen Environmental Chamber provides a means for performing physical tests within a temperature range of -100-350°C (-148-662°F).

Controller type Eurotherm model 3016 for single thermocouple temperature control configuration. Optional sub-zero temperature testing is available via a self-pressurising liquid nitrogen Dewar.

The chamber is supported on a frame located between the columns of the testing machine. When the chamber is not in use, the chamber can be rolled back and parked clear of the operating area.

Chamber – (-150 to 600°C)

towa_admin — Wed, 24 May 2023 10:46:49 +0000

Suitable for most twin screw materials testing machines, the Tinius Olsen Environmental Chamber provides a means for performing physical tests within a temperature range of -150-600°C (-238-1112°F).

Controller type Eurotherm model 3016 for single thermocouple temperature control configuration. Optional sub-zero temperature testing is available via a self-pressurising liquid nitrogen Dewar.

The chamber is supported on a frame located between the columns of the testing machine. When the chamber is not in use, the chamber can be rolled back and parked clear of the operating area.

Automated Tensile & Hardness System

towa_admin — Mon, 06 Sep 2021 09:45:33 +0000

Following the on-going innovation in automated systems, Tinius Olsen has introduced Tensile & Hardness testing as part of the automated testing solution. A hardness testing machine together with the universal testing machines is integrated into the automation system cell along with specimen storage, identification & measurement units and a six-axis robot to move specimens to and from the stations.

For safety and security purposes, the automated cell has various options such as interlocking doors and password protection on the specimen rack window and the door. For 24/7 surveillance, the cell is able to integrate camera systems, which can be accessed from a PC, mobile, tablet or even remotely.

Horizon software is equipped to handle end-to-end operations after the specimens are fed into the testing cell. The output package from the software includes results, graphs and videos, all delivered to teams at their workstations, stored for recall and back-up and wrapped with suitable traceability details to support compliance.