Compression | Tinius Olsen

Chamber – (Ambient to 600°C)

towa_admin — Wed, 24 May 2023 11:08:37 +0000

Suitable for most twin screw materials testing machines, the Tinius Olsen Environmental Chamber provides a means for performing physical tests within a temperature range of Ambient-600°C (Ambient-1112°F).
Air is forced over the heating elements located in an insulated enclosure protecting the user and forced into the working chamber area top and bottom. It is then drawn back through the centre of the chamber, through a baffler to the heating elements and recirculated.

Controller type Eurotherm model 3016 for single thermocouple temperature control configuration. Optional sub-zero temperature testing is available via a self-pressurising liquid nitrogen Dewar.

Door is left hinged. Safety interlock operated by door hinge cut heating process when door is opened. Viewing window is central to door 350mm high by 170mm wide. supports use of non contacting extensometer and deflectometers.

The chamber is supported on a frame located between the columns of the testing machine. When the chamber is not in use, the chamber can be rolled back and parked clear of the operating area.

Chamber – (Ambient to 350°C)

towa_admin — Wed, 24 May 2023 11:07:47 +0000

Air is forced over the heating elements located in an insulated enclosure protecting the user and forced into the working chamber area top and bottom. It is then drawn back through the centre of the chamber, through a baffler to the heating elements and recirculated.

Controller type Eurotherm model 3016 for single thermocouple temperature control configuration. Optional sub-zero temperature testing is available via a self-pressurising liquid nitrogen Dewar.

The chamber is supported on a frame located between the columns of the testing machine. When the chamber is not in use, the chamber can be rolled back and parked clear of the operating area.

Chamber – (-100 to 350°C)

towa_admin — Wed, 24 May 2023 11:05:51 +0000

Suitable for most twin screw materials testing machines, the Tinius Olsen Environmental Chamber provides a means for performing physical tests within a temperature range of -100-350°C (-148-662°F).

Controller type Eurotherm model 3016 for single thermocouple temperature control configuration. Optional sub-zero temperature testing is available via a self-pressurising liquid nitrogen Dewar.

The chamber is supported on a frame located between the columns of the testing machine. When the chamber is not in use, the chamber can be rolled back and parked clear of the operating area.

Chamber – (-150 to 600°C)

towa_admin — Wed, 24 May 2023 10:46:49 +0000

Suitable for most twin screw materials testing machines, the Tinius Olsen Environmental Chamber provides a means for performing physical tests within a temperature range of -150-600°C (-238-1112°F).

Controller type Eurotherm model 3016 for single thermocouple temperature control configuration. Optional sub-zero temperature testing is available via a self-pressurising liquid nitrogen Dewar.

The chamber is supported on a frame located between the columns of the testing machine. When the chamber is not in use, the chamber can be rolled back and parked clear of the operating area.

Compression Test Attachment

towa_admin — Fri, 27 Aug 2021 06:21:28 +0000

Platens are flat plates or disks used to enact a compressive force on a sample. These fixtures are designed to be used in conjunction with a Tinius Olsen UTM for Compression Tests.

Model SL – Compression Only

towa_admin — Tue, 10 Aug 2021 08:36:07 +0000

Tinius Olsen’s popular line of SL hydraulic testing machines is complemented by a series of compression-only test frames. These frames have the same robust design, quality materials and precision engineering as the tension and compression frames, but test in compression only.

The Tinius Olsen SL series stands out because of its accuracy, dependability and power. Its efficient footprint size and nominal maintenance comes from the patented dual low pressure hydraulic loading system, which delivers exacting control of movement when it is under constant speed, stress or strain rate control.

All SL systems meet ASTM, ISO, GOST, GB and other international standards in terms of accuracy. Accuracy is within or better than +/- 0.5% of applied force from 0.2% to 100% of frame capacity.

There are a number of interface options available in support of test productivity and user preferences: tethered handheld, wireless and/or virtual through the test, control and reporting software.

Model 3000SL

towa_admin — Tue, 10 Aug 2021 07:05:26 +0000

The Model 3000SL is designed for tension, compression, flexure and shear strength testing on materials, assemblies and components. The robust design, quality materials and precision engineering ensure testing capability even at full load, day after day.

Tinius Olsen’s hydraulic testers have long been recognized as the standard for accuracy, dependability and versatility in universal testing machines. The many thousands of testers currently in use throughout the world attest to this fact. Now more than ever, the SL series represents the highest standard in hydraulically powered universal testing machines.

Model 1500SL

towa_admin — Tue, 10 Aug 2021 07:01:23 +0000

The model 1500SL is designed for tension, compression, flexure and shear strength testing on materials and assemblies. The robust design incorporates quality materials and components and ensures that our reputation for superior system performance, ease of use, and longevity is maintained.

Model 50ST

towa_admin — Mon, 09 Aug 2021 09:41:27 +0000

The model 50ST is designed for tension, compression, flexure and shear strength testing on materials and assemblies. The robust design incorporates quality materials and components and ensures that our reputation for superior system performance, ease of use, and longevity is maintained.

A variety of loadcells are available at differing capacities that give precise applied load measurements from the smallest test specimen to ones that go to full machine capacity. Test machines become complete, powerful test systems with the addition of grips to hold the specimen, strain measurement instrumentation and Tinius Olsen’s Horizon software.

Model 25ST

towa_admin — Mon, 09 Aug 2021 09:38:24 +0000

The model 25ST is designed for tension, compression, flexure and shear strength testing on materials and assemblies. The robust design incorporates quality materials and components and ensures that our reputation for superior system performance, ease of use, and longevity is maintained.